Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Steering Wheel: Service and Repair
Steering Wheel
Steering Wheel
Special Tool(s)
Removal and Installation
1. Turn the steering wheel to the straight-ahead position and turn the ignition switch to the OFF position.
2. Remove the driver air bag module.
3. Loosen the steering wheel bolt.
4. Disconnect the electrical connector.
5. CAUTION: Removing the steering wheel without using a puller can damage the column bearings.
Use the Differential Side Bearing Puller to remove the steering wheel from the steering column shaft.
6. Remove and discard the original steering wheel bolt.