Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Removal
1. Remove the wheel knuckle.
2. Remove and discard the lower ball joint snap ring.
3. Using the special tools, remove the lower ball joint.
Installation
1. Using a clean shop towel and the specified surface cleaner, clean the lower arm ball joint bore and inspect for cracks or damage before installing a
new ball joint. If there is evidence of cracks or damage, a new lower arm must be installed.
2. CAUTION: Use care to prevent adhesive from contacting the ball joint boot or damage to the boot may occur, causing premature ball joint
failure.