Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber and Spring Assembly
Removal and Installation
WARNING: The electrical power to the air suspension system, must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the LH rear quarter trim panel. Failure to do so can
result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
1. If equipped, turn the air suspension switch to the OFF position.
2. Remove the wheel and tire assembly.
3. Remove and discard the nuts.
4. Remove the bolt and flag nut.
^
Discard the flag nut.
5. Remove the shock absorber and spring assembly.