Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Band Apply Servo: Service and Repair
Overdrive Servo
Overdrive Servo
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the main control valve body.
3. NOTE: If the tool is not available, extreme care must be taken. Spring pressure will force overdrive servo piston assembly out of case. Case bore
damage may result from trying to pry on overdrive servo internal retaining ring.
Using the special tool, compress the servo spring to remove the overdrive servo retaining ring.
4. Remove the overdrive servo piston and return spring.
Installation