Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
3. Install the manual control lever shaft.
1
Install the manual control lever shaft.
2
Install the inner manual control lever shaft and nut.
3
Install the manual valve detent lever spring bolt.
4. Install the manual valve detent lever spring.
1
Install the manual valve detent lever spring.
2
Install the manual valve detent lever spring bolt.
5. Install the digital TR sensor.
1
Install the digital TR sensor.
2
Loosely install the bolts.
6. NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.