Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
2
Using a suitable press and the special tool, install the differential bearing.
^
Repeat the steps for the other differential bearing.
18. NOTE: It may be necessary to use the Differential Carrier Spreader to carry out this step.
NOTE: Recheck the flange runout.
Install the differential case with the bearing cups and the shims in the housing.
1
Position the differential case with the bearing cups and shims in their original location.
2
Install the bearing caps.
3
Install the bolts.
4
Rotate the differential case to make sure the bearings have seated correctly.
19. Install the special tool.
20. NOTE: If the runout is still excessive, install a new differential case.
Check the runout with the new differential bearings. If the runout does not exceed the specification, use the new differential bearings for assembly.