Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Seals and Gaskets: Service and Repair
Front Differential
Drive Pinion Seal
Special Tool(s)
Removal
1. Remove the front axle universal joint flange.
2. CAUTION: Do not damage the front axle housing.
Force up on the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer to remove the pinion seal.
Installation
1. Clean the pinion seal bore, and use the Drive Pinion Oil Seal Installer to install the pinion seal.
2. Install the front axle universal joint flange.