Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Universal Joint: Service and Repair
Disassembly and Assembly
Driveshaft Universal Joint Single Cardan
Special Tool(s)
Disassembly
1. Remove the driveshaft.
2. CAUTION: Do not clamp the driveshaft in the jaws of a vise or a similar holding fixture.
Carefully place the driveshaft on a suitable workbench.
3. NOTE: Index the driveshaft components relative to the driveshaft tube. Make sure all components are reassembled in the same relationship to
maintain correct balance.
Index the driveshaft and driveshaft components.
4. Position the special tool in a vise.