Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Axle Shaft Assembly: Service and Repair
Rear Drive Halfshaft
Removal and Installation
Halfshaft
Special Tool(s)
Removal and Installation
NOTE: This procedure applies to both rear halfshaft assemblies.
1. CAUTION: Do not loosen the rear axle wheel hub retainer until after the wheel and tire assembly is removed from the vehicle. Wheel bearing
damage will occur if the wheel bearing is unloaded with the weight of the vehicle applied.
With the vehicle in NEUTRAL, raise and support the vehicle.
2. Remove the rear wheel and tire assembly.
3. NOTE: Have an assistant press the brake pedal to keep the axle from rotating.
Remove and discard the rear axle wheel hub retainer and the washer.