Navigator 4WD V8-5.4L SOHC VIN 5 (2005)
Wiper Motor: Service and Repair
Windshield Wiper Motor
WINDSHIELD WIPER MOTOR
Removal and Installation
1. Remove the mounting arm and pivot shaft.
2. NOTE: Mark the position of the windshield wiper motor crank before it is disconnected.
Disconnect the windshield wiper motor crank.
-
Remove the bolt.
3. Remove the bolts and the windshield wiper motor.
4. NOTE: The windshield wiper motor crank must be set to the same location for the windshield wiper mounting arm and pivot shaft to be installed
properly. Refer to component test. See: Testing and Inspection/Component Tests and General Diagnostics/Windshield Wiper Motor
To install reverse the removal procedure.