Navigator 4WD V8-5.4L SOHC VIN L (1998)
Front Crankshaft Seal: Service and Repair
REMOVAL
1. Remove the crankshaft pulley.
2. Use the (A) Front Cover Seal Remover to remove the (B) front cover seal.
INSTALLATION
1. Lubricate the (A) engine front cover and the (B) front oil seal inner lip.
^
Use SAE 50W engine oil meeting Ford specification WSS-M2C153-G.
2. Use the (A) Crankshaft Seal Replacer/Cover Aligner to install the (B) crankshaft front seal into the (C) engine front cover.
3. Install the crankshaft pulley.
