Navigator 4WD V8-5.4L SOHC VIN L (1998)
Steering Gear: Adjustments
1. Turn the steering wheel from right stop to left stop at least once.
NOTE: The engine should not be running.
2. Remove the driver side air bag.
3. Raise and support the vehicle.
4. Remove the steering sector shaft arm drag link castellated nut.
(1) Remove the cotter pin.
(2) Remove the castellated nut.
5. Use Pitman Arm Puller to separate the steering sector shaft arm drag link.
6. Lower and support the front of the vehicle.
NOTE: The front wheels should not touch the ground.
