Navigator 4WD V8-5.4L SOHC VIN L (1998)
6. Disconnect the air line from the air spring.
-
Push the green ring in and hold it firmly to release and remove the air line.
7. Disconnect the air spring solenoid electrical connector and remove the air spring.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
-
When installing the rear air spring it is necessary to inflate the air suspension system.
-
When installing air line into air spring solenoid a minimum of 3 mm (1/8 in) of white air line must be inserted into the fitting for correct
installation.
