lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Air Suspension - Repeat Compressor Drier Failures|Page 8455 > < Air Suspension - Repeat Compressor Drier Failures|Page 8453
Page 1
background image

Compressor/Pump: Description and Operation

The air compressor:

-

Is not interchangeable with the Rear Air Suspension (RAS) air compressor.

-

Consists of the compressor and vent solenoid; neither are replaceable as individual items.

-

Is mounted in the engine compartment between the washer fluid bottle and headlamp (RH front corner).

-

Is a single cylinder electric motor driven unit that provides pressurized air as required.

-

Is powered by a solid state relay, controlled by the air suspension control module.

-

Passes pressurized air through the compressor air drier that contains silica gel (a drying agent). Moisture is then removed from the compressor air
drier when vented air passes out of the system during vent operation.

-

The compressor air drier may be replaced separately.

-

Incorporates a snorkel that may be replaced separately.

-

The compressor air drier has dual ports and is not interchangeable with the RAS drier.

Air Suspension - Repeat Compressor Drier Failures|Page 8455 > < Air Suspension - Repeat Compressor Drier Failures|Page 8453