Navigator 4WD V8-5.4L SOHC VIN L (1998)
Level Control Solenoid Valve: Description and Operation
Vent Solenoid (Level Control)
The vent solenoid:
-
Allows air to escape from the system during venting actions.
-
Is located in the air compressor cylinder head.
-
Shares a common electrical connector with the air compressor motor.
-
Is enclosed in the cylinder head casting, which forms an integral valve housing that allows the valve tip to enter the pressurized side of the system.
-
Has an O-ring seal that prevents air leakage past the valve tip.
-
Opens when the air suspension control module determines lowering is required.
-
Provides an escape route for pressurized air when system pressures exceed safe operating levels.
-
Has a 260 psi internal relief valve.