Navigator 4WD V8-5.4L SOHC VIN L (1998)
NOTE: Rear fill solenoid shown, front gate solenoid and front fill solenoid similar.
INSTALLATION
1. To install reverse removal procedure.
NOTE:
-
After installing the solenoid it is necessary to inflate the air suspension system.
-
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
-
When installing air line into solenoid a minimum of 3 mm (1/8 in) of white air line must be inserted into the fitting for correct installation.