Navigator 4WD V8-5.4L SOHC VIN L (1998)
3. Inspect the direct clutch piston check ball.
1
Check for freedom of movement and proper seating.
2
Clean the direct clutch piston with solvent, if necessary.
3
Replace the direct clutch piston, if damaged.
4. NOTE: The piston should rotate freely in the drum.
Install the direct clutch piston.
5. NOTE: Make sure the (A) protrusions are properly engaged with the (B) lugs.
Install the direct clutch return spring assembly.
6. CAUTION: Do not fully compress the return springs or damage to spring may occur.
Using the (A) Clutch Spring Compressor, compress the (B) direct clutch return spring assembly and install the (C) direct clutch return spring
retaining ring. Remove the tool.