Navigator 4WD V8-5.4L SOHC VIN L (1998)
7. Remove the coast clutch piston.
8. Remove the coast clutch piston outer seal.
9. Remove the coast clutch piston inner seal.
ASSEMBLY
NOTE: Soak all friction clutch plates for 15 minutes in clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent
meeting FORD specification.
NOTE: Prior to installation, lightly lubricate all O-ring seals with clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or
equivalent meeting FORD specification.
1. NOTE: Make sure the seal lip faces the coast clutch cylinder.
Install the coast clutch piston inner seal.