Navigator 4WD V8-5.4L SOHC VIN L (1998)
11. NOTE: Lightly lubricate the needle bearing with petroleum jelly to hold it in place during assembly.
NOTE: The bearing large inner diameter radius must face inward.
Install the No. 8B forward clutch needle bearing.
12. NOTE: Stagger the interlocking opening on the seals 180° apart.
Install the two new cast iron forward clutch cylinder seals in the grooves.
13. NOTE: Lightly lubricate the thrust bearing with petroleum jelly to hold it in place during assembly.
NOTE: The black side of the bearing must face upward.
Install the No. 9A forward clutch thrust bearing.
Forward Hub and Ring Gear
DISASSEMBLY