Navigator 4WD V8-5.4L SOHC VIN L (1998)
6. NOTE: Refer to the tool chart preceding the Intermediate/Overdrive Cylinder Assembly, Disassembled View in this procedure for proper tool
number identification.
Using the (A) Clutch Spring Compressor Plate, the (B) Clutch Spring Compressor Bar and the (C) Clutch Spring Compressor Plate, compress the
overdrive clutch piston return spring.
7. Install the overdrive clutch piston return spring retainer. Make sure the retainer is fully seated, then remove the tools.
One-Way Clutch, A/T
Part 1 Of 2
