Navigator 4WD V8-5.4L SOHC VIN L (1998)
-
Repeat for the other differential bearing.
38. NOTE: Make sure the indicator needle is in the spreader adapter hole.
Install the Dial Indicator Bracketry and Dial Indicator.
1
Install the Differential Housing Spreader.
2
Install the Dial Indicator Bracketry, the Dial Indicator and the Clutch Housing Alignment Adapter.
39. CAUTION: Overspreading can cause damage to the front axle housing.
Spread the front axle housing.
40. CAUTION: Never attempt to drive differential bearing shim in place. The front axle housing machined surfaces can be permanently damaged.
If removed, position the differential bearing shims.
1
Apply a light coating of Premium Long Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B to one side of the
differential bearing shims to help hold them in place.
2
Position the differential bearing shims.