Navigator 4WD V8-5.4L SOHC VIN L (1998)
27. Use the 2-Jaw Puller and the Step Tool to remove the differential bearings.
28. NOTE: Press against the differential bearing inner cone only.
Install the new differential bearings.
1
Position the appropriate differential bearing (RH or LH).
2
Use the appropriate press to install the differential bearing.
-
Repeat the procedure for the other differential bearing.
29. Install the differential case in the housing without the ring gear.
1
Position the differential case.
2
Install the bearing caps.
3
Install the bearing cap bolts.
30. Position the Dial Indicator with Bracketry.