Navigator 4WD V8-5.4L SOHC VIN L (1998)
6. Remove the driveshaft slip yoke.
1
Position the driveshaft slip yoke in the U-Joint Tool.
2
Press out the bearing cups.
3
Remove the driveshaft slip yoke.
7. Press out the second set of bearing cups.
1
Position the driveshaft slip yoke in the U-Joint Tool.
2
Press out the bearing cup.
3
Rotate the driveshaft slip yoke.
4
Press out the remaining bearing cup.
8. Remove the centering cup spring.