Navigator 4WD V8-5.4L SOHC VIN L (1998)
Universal Joint: Service and Repair
Single Cardan
DISASSEMBLY
1. Remove the driveshaft.
2. CAUTION: Do not clamp the driveshaft in the jaws of a vise or similar holding fixture.
Place the driveshaft on a suitable workbench, being careful not to damage the tube.
3. NOTE: If components are not marked and therefore installed incorrectly, driveline imbalance can occur.
Mark the positions of the driveshaft components.
4. Clamp the U-Joint Tool in a vise.
5. Remove the snap rings.