Navigator 4WD V8-5.4L VIN 5 (2006)
Keyless Entry Key-Pad: Service and Repair
Remote Keyless Entry Keypad Code Programming
REMOTE KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. Enter the permanent factory remote keyless entry (RKE) keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases
the stored customer code. The doors lock, then unlock, confirming the code is erased. The existing code does not need to be erased to program a
new code.
3. Within 5 seconds, enter the new 5-digit RKE keypad code. The doors lock and unlock to confirm the new code is programmed.