Navigator 4WD V8-5.4L VIN 5 (2006)
CD Changer: Service and Repair
COMPACT DISC (CD) CHANGER
Removal and Installation
1. Remove the RH and LH lower kick panels.
2. Remove the 2 screws and the CD changer.
-
Disconnect the electrical connector.
-
Slide the CD changer out by pulling back until the tangs slide out of the retaining slots.
3. NOTE: Only carry out this step if installing a new CD changer.
Remove the 4 screws and the 2 brackets from the CD changer.
4. To install, reverse the removal procedure.