Navigator 4WD V8-5.4L VIN 5 (2006)
2
Lift upward on the interior door handle retaining bracket and pivot the interior door handle out of the bracket.
3
Remove the cable from the door handle.
10. Release the crash sensor harness pin-type retainers.
11. Position the front door window regulator harness aside.
1
Disconnect the electrical connectors.
2
Release the pin-type retainers.
12. Remove the front window regulator.
1
Loosen the 2 hanger bolts.
2
Remove the front window regulator bolts and front top run channel bolt.
-
To install, tighten to 11 Nm (8 lb-ft).
13. To install, reverse the removal procedure.