Navigator 4WD V8-5.4L VIN 5 (2006)
2. Open the liftgate and remove the upper liftgate trim panel.
-
Pull lower corners toward the center on both sides and pull down along the top.
3. Remove the assist handle.
1
Remove the screws.
2
Remove the assist handle.
4. Remove the lower liftgate trim panel.
1
Hold the trim panel at the center area and slightly pull on the center clips to allow a tool to access the clips.
2
Release the 12 clips 2 to 3 at a time, starting from the right side working to the left side.
3
Once all the clips are released, slide the liftgate trim panel forward and down, away from the sheet metal.
5. To install, reverse the removal procedure.
Rear Quarter Trim Panel
REAR QUARTER TRIM PANEL
