Navigator 4WD V8-5.4L VIN 5 (2006)
^
Support the caliper using mechanic's wire.
^
To install, tighten to 35 Nm (26 ft. lbs.).
5. Remove the brake pads from the caliper anchor plate.
6. Remove the 2 brake caliper anchor plate bolts and the brake caliper anchor plate.
^
To install, tighten to 190 Nm (140 ft. lbs.).
7. To install, reverse the removal procedure.
^
Test the brakes for normal operation.
Brake Caliper Anchor Plate, Front
Brake Caliper Anchor Plate
Removal