Navigator 4WD V8-5.4L VIN 5 (2006)
Fan Blade: Service and Repair
Removal and Installation
Cooling Fan - Blade, Clutch and Shroud
Special Tool(s)
Removal and Installation
1. Remove the air cleaner inlet pipe and resonator. For additional information, refer to Fuel Delivery and Air Induction.
2. Remove the retainers and the radiator sight shield.
3. Remove the 2 bolts and the lower cooling fan shroud.
^
To install, tighten to 3 Nm (27 inch lbs.).
4. Remove the 2 bolts and the upper cooling fan shroud.
^
To install, tighten to 3 Nm (27 inch lbs.).
5. Using the special tools, remove the cooling fan assembly.
^
To install, tighten to 55 Nm (41 ft. lbs.).
6. To install, reverse the removal procedure.