Navigator 4WD V8-5.4L VIN 5 (2006)
4. Disconnect the LH camshaft position (CMP) sensor electrical connector.
5. Remove the LH CMP sensor and the bolt.
6. NOTE: If the camshaft lobes are not exactly positioned as shown, the crankshaft keyway will require one full additional rotation to 12 o'clock.
The No.5 cylinder camshaft lobe must be coming up on the exhaust stroke. Verify by noting the position of the 2 intake camshaft lobes and the
exhaust lobe on the No.5 cylinder.