Navigator 4WD V8-5.4L VIN 5 (2006)
Install the A/C compressor pulley.
1
Install the special tool.
2
Install the A/C compressor pulley.
5. Install the A/C compressor pulley snap ring with the bevel side out.
6. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
7. Install the A/C clutch disc and hub.
8. Using the special tool, install the A/C compressor clutch disc and hub nut.
1
Hold the A/C clutch disc and hub with the special tool.
2
Tighten the nut to 20 Nm (15 lb-ft).
9. Measure and adjust the clutch air gap by removing or adding A/C clutch disc and hub spacers.
10. Install the A/C compressor.