Navigator 4WD V8-5.4L VIN 5 (2006)
A2-A3
Normal Operation
The ABS module communicates with the diagnostic tool through the high speed controller area network (CAN), circuits 1814 (WH/LB) and 1815
(PK/LB). Check the high speed CAN circuits 1814 (WH/LB) and 1815 (PK/LB) between the ABS module C135 and the data link connector (DLC)
C251. The total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the CAN circuits,
damage to the DLC C251, damage to the ABS module C135, or a problem in an in-line connector.
Possible Causes
-
high speed CAN circuit 1814 (WH/LB) open
-
high speed CAN circuit 1815 (PK/LB) open
-
ABS module
-
ABS module C135
Test B: The Restraint Control Module (RCM) Does Not Respond To The Diagnostic Tool
PINPOINT TEST B: THE RESTRAINT CONTROL MODULE (RCM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL