Repair of Evaporative Emission Control Canister for Navigator 4WD V8 VIN 5
8. Remove the EVAP canister and fuel filler pipe bolt to crossmember.
-
To install, tighten to 15 Nm (11 lb-ft).
9. Remove the 2 EVAP canister bolts to spare tire carrier.
-
To install, tighten to 25 Nm (18 lb-ft).
10. Place the EVAP canister bracket assembly on a clean work surface.
11. Disconnect the EVAP canister vent solenoid-to-EVAP canister hose.
12. Disconnect the hose from the dust separator.