Navigator 4WD V8-5.4L VIN 5 (2006)
16. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed,
install a new shoulder safety belt guide cover.
Remove the second row passenger side safety belt guide.
1
Release the retaining tab at each side and open the safety belt guide cover.
2
Remove the nut.
3
Remove the second row passenger side safety belt guide.
17. Remove the passenger side C-pillar trim panel.
1
Separate the weather-stripping along the passenger side C-pillar trim panel.
2
Remove the bolt cover and bolt.
3
Pull out to release the retainers and remove the passenger side C-pillar trim panel.
18. Disconnect the passenger side safety canopy electrical connector.