Navigator 4WD V8-5.4L VIN 5 (2006)
Steering Shaft: Service and Repair
Steering Column Shaft
Steering Column Shaft
Removal and Installation
All vehicles
1. CAUTION: Do not allow the steering column shaft to rotate while the intermediate shaft is disconnected or damage to the clockspring can result.
If there is evidence that the shaft has rotated, the clockspring must be removed and recentered.
Place the steering wheel in the straight-ahead position and turn the ignition switch to the OFF position.
2. NOTE: A new bolt must be installed.
Remove the bolt and disconnect the intermediate shaft from the steering column.