Navigator 4WD V8-5.4L VIN 5 (2006)
![background image](/lincoln/navigator_4wd/v8-5.4l_vin_5/Page-1897005.png)
3. Install the secondary latch to the lower transmission fluid cooler tube at the radiator.
4. Connect the upper transmission fluid cooler tube to the radiator.
5. Install the secondary latch to the upper transmission fluid cooler tube at the radiator.
6. NOTE: Inspect the case to make sure that the old band seals and backer rings are not stuck in the case.
NOTE: Install new band seals and backer rings on the ends of the cooler lines prior to installing.
Install new seals on the transmission fluid cooler tubes.
1
Transmission fluid cooler tube.
2
Retainer plate.
3
Backer ring.
4
Band seal.