Navigator 4WD V8-5.4L VIN 5 (2006)
7. Install the transmission fluid cooler tube retainer to the front of the engine.
^
Tighten to 25 Nm (18 ft. lbs.).
8. Connect the transmission fluid cooler tubes to the thermostatic valve.
^
Tighten to 20 Nm (15 ft. lbs.).
9. Connect the transmission fluid cooler tubes to the transmission.
^
Tighten to 20 Nm (15 ft. lbs.).
10. Fill the transmission with the specified type and quantity of transmission fluid.
11. Check for leaks.
Transmission Fluid Cooler Tubes, Without Auxiliary Transmission Fluid Cooler
Transmission Fluid Cooler Tubes, Without Auxiliary Transmission Fluid Cooler
Special Tools