Navigator 4WD V8-5.4L VIN 5 (2006)
15. NOTE: 4x2 shown, 4x4 similar.
Remove the extension housing and gasket.
1
Remove the nuts and bolts.
2
Remove the extension housing and gasket.
^
Allow fluid to drain into suitable container.
Installation
All vehicles
1. NOTE: 4x2 shown, 4x4 similar.
Install the extension housing and a new gasket.
1
Position the extension housing gasket and the extension housing.
2
Install the bolts and nuts.
^
Tighten to 27 Nm (20 ft. lbs.).
2. Install the fuel line bracket.
^
Tighten to 25 Nm (18 ft. lbs.).
3. Raise and position the transmission.