lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Selector Lever Button|Page 6001 > < Selector Lever Button|Page 5999
Page 1
background image

Shifter A/T: Service and Repair
Selector Lever - Column Shift

Selector Lever - Column Shift 

Selector Lever - Column Shift

Removal and Installation 

1. WARNING:  To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing

or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or
striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood
latches.
Please refer to the appropriate vehicle shop manual to determine the location of the front air bag sensors.
The side air bag sensors are located at or near the base of the B-pillar.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect

Selector Lever Button|Page 6001 > < Selector Lever Button|Page 5999