Navigator 4WD V8-5.4L VIN 5 (2006)
Torque Converter: Description and Operation
6HP26 Automatic Transmission
Torque Converter
The torque converter is a 3-element unit containing a dual plate clutch. The clutch can be controlled and engaged in any gear 1st to 6th. Calibration
parameters may be set to allow lock-up in a higher gear only. The clutch is applied by removing fluid pressure from one side of the plate. The torque
converter transmits and multiplies torque. The torque converter includes the following 3 elements:
^
Impeller assembly
^
Turbine assembly
^
Reactor assembly
The standard torque converter components operate as follows:
Rotation of the converter housing and impeller set the fluid in motion.
^
The turbine reacts to the fluid motion from the impeller, transferring rotation to the geartrain through the input shaft.
^
The reactor redirects fluid going back into the impeller, allowing for torque multiplication.
^
Power is transmitted from the torque converter to the planetary gearsets and other components through the input shaft.
Torque Converter Clutch
The torque converter clutch is a device that reduces, slip in the torque converter and, therefore, helps to keep fuel consumption to a minimum.
The torque converter clutch is engaged and released by the control system.
Pressure at the torque converter clutch piston is determined by an electronic pressure control valve.
