Navigator 4WD V8-5.4L VIN 5 (2006)
2. CAUTION: Do not pry on the swivel tube to disconnect the transmission shift linkage.
Disconnect the manual control lever shift control cable.
3. Disconnect the digital TR electrical connector.
4. CAUTION: Discard the outer manual control lever shaft nut. Do not reuse. The old nut will not retain the torque specification.
Remove the manual control lever.
1
Remove and discard the manual control nut.
2
Remove the manual control lever.
5. Remove the digital TR sensor bolts and the digital TR sensor.
Installation