Navigator 4WD V8-5.4L VIN 5 (2006)
5. Remove the main control valve body and discard the pump outlet screen.
Installation
1. NOTE: Make sure that the drive pin of the manual valve detent lever assembly engages the manual valve in the correct location prior to installing
the bolts.
Position the main control valve body gasket and main control valve body using 2 bolts as a guide.
2. NOTE: The main control valve body bolts will be tightened in later steps.
Loosely install the long main control valve body bolts.
3. NOTE: The main control valve body bolts will be tightened in later steps.