lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

4R70E/4R75E|Page 6217 > < 4R70E/4R75E|Page 6215
Page 5
background image

7. Connect the main transmission electrical harness by pushing it in and twisting the outer shell to lock it in place.

8. CAUTION:  The fluid fill plug located on the side of the transmission is near the exhaust system. The exhaust will be extremely hot during this

procedure. Use care when working near the exhaust and the heat shields.

Remove the fluid fill plug.
^

The fill plug is located on the RH rear side of the case near the transmission electrical connector.

9. CAUTION:  The use of any other transmission fluid than specified can result in the transmission failing to operate correctly or transmission

failure.

CAUTION:  The fluid fill plug located on the side of the transmission is near the exhaust system. The exhaust will be extremely hot during this
procedure. Use care when working near the exhaust and the heat shields.

Fill the transmission.
^

Add 4.7 liters (5 quarts) of clean automatic transmission fluid to the transmission through the fluid fill hole. Stop when the fluid runs out of
the bottom of the hole.

4R70E/4R75E|Page 6217 > < 4R70E/4R75E|Page 6215