Navigator 4WD V8-5.4L VIN 5 (2006)
Seals and Gaskets: Service and Repair
Transfer Case Rear Output Shaft Oil Seal
Special Tools
Removal
1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. Failure to do this will result is unexpected inflation or deflation of the vehicle during these operations.
With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: Index-mark the rear driveshaft yoke and pinion flange to maintain initial driveshaft balance during installation.
Remove the rear driveshaft.
3. Using a suitable tool, remove the oil seal.
Installation
1. To install, reverse the removal procedure.
^
Using the special tool, install the oil seal.