Navigator 4WD V8-5.4L VIN 5 (2006)
8. If installing a new rear wiper motor, remove the liftgate window glass latch.
1
Disconnect the electrical connector.
2
Remove the bolts.
-
To install, tighten to 8 Nm (71 lb-in).
9. Remove the rear window wiper motor.
1
Disconnect the electrical connector.
2
Remove the bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
Installation
1. If installing a new rear wiper motor, install the liftgate window glass latch.
-
Tighten bolts to 8 Nm (71 lb-in).
2. NOTE: An audible click should be heard as the striker engages the latch.