Town Car V8-281 4.6L SOHC (1991)
Suspension Control Module: Service and Repair
Fig. 1 Air Suspension System
1.
Disconnect battery ground cable.
2.
Turn sir suspension switch to the Off position.
3.
Remove RH luggage compartment trim panel.
4.
Remove control module attaching nuts, Fig. 1.
5.
Pull module forward to gain access to electrical connectors.
6.
Push control module electrical connector release button, then pull connector from module.
7.
Reverse to install. Torque module attaching nuts to 5-7 ft. lbs.