Town Car V8-281 4.6L SOHC (1991)
Windshield: All Technical Service Bulletins
Windshield Moldings - Loose/Windnoise
Article No.
92-7-1
03/25/92
^
TRIM - EXTERIOR - WINDSHIELD MOULDINGS LOOSE OR DISLODGED - VEHICLES BUILT BEFORE 11/19/91
^
NOISE - "BUZZ" FROM LOOSE OR DISLODGED WINDSHIELD MOULDINGS - VEHICLES BUILT BEFORE 11/19/91
LINCOLN-MERCURY: 1990-91 TOWN CAR
This TSB article is being republished in its entirety to include vehicles built before 11/19/91.
ISSUE:
A windnoise or "buzz" may occur because the upper windshield moulding becomes loose or partially dislodged along the top of the glass.
ACTION:
Apply RTV silicone sealer to improve retention of the upper moulding assembly to the glass. Refer to the following procedure for service
details.
1.
Press the moulding assembly back onto the windshield.
2.
Lift the moulding as shown in Figure 1.
3.
Fill the area along the top of the windshield with RTV silicone sealer.
4.
Clean excess RTV silicone sealer off of the vehicle.
PART NUMBER
PART NAME
D6AZ-19562-BA
RTV Silicone Sealer
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES:
90-8-2, 91-15-3
WARRANTY STATUS: Eligible Under Basic Warranty
Coverage
OPERATION DESCRIPTION
TIME
920701A
Apply RTV Silicone Sealer
0.7 Hr.
