Town Car V8-4.6L (2008)
Parking Brake Cable: Adjustments
Parking Brake Cable Adjustment
1. Release the parking brake control, using the parking brake release handle.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. Pull the parking brake cable adjuster clip downward. The tensioner spring will take up the cable slack and preload the cables.
4. Push upward on the bottom of the clip to lock the adjustment. If the clip does not slide upward, move the assembly slightly to align the closest
groove on the parking brake cable adjuster rod with the clip.
5. NOTE: If new cables are installed, allow 20 minutes prior to releasing the parking brake control.
Apply the parking brake control fully and release using the parking brake release handle.
6. Repeat Steps 4 and 5 to complete the adjustment procedure.