Town Car V8-4.6L (2008)
Windshield: Procedures
GLASS RESEAL - WINDSHIELD
Material
Material
1. Remove the cowl panel grille.
2. If equipped, remove the overhead console.
3. Position the LH and RH front door weatherstrips aside.
4. Remove the LH and RH A-pillar trim panel.
5. Remove the LH and RH sun visors and sun visor clips.
6. Partially lower the front portion of the headliner and block with a suitable material.
7. Clean the edge formed by the existing urethane and the glass on the inside at the top and sides and outside on the bottom of the windshield with
glass cleaner.
8. Cut the urethane adhesive applicator tip to specification.